Exhaust Pipe Interlock Flexible Metal Hose Making Machine   Stripwound Exhaust Pipe Maker

Exhaust Pipe Interlock Flexible Metallic Hose Creating Equipment / stripwound exhaust pipe maker

1. Solution Information

What can our equipment create?

1. Spherical Interlock Hose (2S & 3S)
2. Polygonal Interlock Hose (2S & 3S)
3. Interlock Hose with Yarm
4. Vehicle / Boat Engine Versatile Exhaust Pipe


2. CZPT Parameter

a. Device No.1:

Machine Sort CF-one hundred fifty
Offered Condition Spherical or polygonal with different forming dies
Size range ID38-a hundred and fifty
Forming velocity one hundred fifty-350m/8hrs
Strip thickness .25-.5mm
Strip width 16 and 20mm
Energy 4KW
Outer proportions 3500mmX1200X1600mm
Bodyweight 950kgs

b. Equipment No.two:

Machine Variety CF-300
Obtainable Shape Round or polygonal with different forming dies
Size variety ID150-300
Forming pace 100-200m/8hrs
Strip thickness .twenty five-.8mm
Strip width sixteen,twenty, 28, 32mm
Electrical power 11KW
Outer dimensions 3500mmX1200X1600mm
Excess weight 1200kgs

c. Other Types’ Parameter


Generating size/mm ID38-a hundred and fifty ID75-three hundred ID200-400 ID38-sixty five
Velocity M/H one hundred-a hundred and twenty 150-four hundred one hundred-a hundred and twenty a hundred and fifty-400
Strip measurement /mm sixteen-twenty*.25-.five 20*.45m 28*.5-.8 fifteen*.25
Variety Polygonal Round spherical polygonal

three. Equipment Instruction

Principal: the machine included advanced technologies, the universal wheels and 4 pairs of forming wheels will be utilized to type the hose stage by phase. The dimension of the interlock hose will be exact same as forming mould.
one. 7 pairs of wheels are all transmission wheels (refers to wheel drawings), the very first pair of wheel is positioning (refers to wheel drawing 001).They can not be pressed way too hard to stop way too quickly feeding.The allowable tolerance in the two sides can not be much more than .3mm. The 3rd pair are folding wheels(refers to drawing 3),the folding diploma of asymmetry will not be a lot more than .3mm. The fourth pair folding & shaping wheel(refer to wheel drawing 004), the strip will be folded and formed to be 90° angle. The fifth pair (refer to drawing five) will make 90° angle strip 60° angle.
two. Right after the strip goes via 7 pairs of wheels, wind and repair the strip on the forming mildew, and then press the slot action by step with seven pressing wheels. Operate the device slowly and gradually until the correct hose comes out.
three.The transmission wheels have been modified ahead of shipping and delivery from the factory.

When modifying the 4 centre urgent wheels, remember to observe: the very first pair can not be as well limited, then the 2nd will be tighter than first, the other will be by the same way.
The turning course of center pressing wheels:

Adjusting Procedure:
The seven pairs of wheels(one-seven) will be positioned with spacers, the higher wheel have to be in the exact same heart line with reduced wheel, do not repair them. There are spacers within lower wheels which have been altered just before delivery. The spacers outside the wheels will be pressed by the nuts. The spacers of different thickness will be employed to make sure the reduce wheel just in the center of the strip and equally sides folded similarly. The 5 pairs of wheels have to be pressed down parallelly with exact same drive. Make sure the strips are not damaged when pressing down the wheels.
Never fasten the nuts on the pressing equipment to preserve the spring inside can move freely.
You want to put gasket when it is essential to make tight interlock hose.
When modify the transmission wheels, it is needed to unfastened all wheels, and then permit the wheels tumble down freely and then fasten.
Preserve the length between urgent wheel help and the big plate of the device one.5mm one particular than an additional clockwise.(for three-s machine, it will be 1.0mm)

  1. Incorporate the grease in the chain wheel and chain prior to start off-up and preserve the shaft and chain are greased correctly.
  2. Operate the machine with uniform pace, in no way speed up or lessen the speed out of the blue. When commence up the device, the velocity should be considerably less than 400r/min and max. speed should not be a lot more than 800r/min.
  3. Cut off the energy source when the device is not operating.
  4. Fasten the nuts on the wheels and quit them from sliding and maintain verify to make confident.

4. Company Overview

Comflex CZPT Co.,Ltd

We supply all varieties of equipment connected to hoses, bellows, and fabric enlargement joints with more than 35 years. Meanwhile, we can also design and style and manufacture particular tools in accordance your special requirement. Our machines have been exported to a lot of international locations, these kinds of as Ukraine,Russia, Viet Nam, India, Canada, Australia, Italy, France, United kingdom, Turkey, and so forth.. We assure you lengthy-expression mutual useful cooperation romantic relationship!

5. Software

Exhaust hose creating device are extensively used to manufacturing exhaust pipe or flex connectors for the truck. When compared with interlock ASS hose, the 3-s hose has the adhering to functions:

  • Low leakage
  • Much better sealing functionality
  • Versatile
  • Exhaust connector, Exhaust pipe for the truck.
    CZPT versatile metallic hose creating.
  • SS & sss sort, round & polygonal kind



Produce speed/hr

Strip size(width*thickness)







two hundred












a hundred








a hundred




one hundred



sixty,sixty three,70,seventy six,80mm 







six. Packing & Delivery

seven. CZPTer Pay a visit to

8. Certification

FAQ for interlock hose making machine

Q:Why choose us as your supplier?
A:We are most professional in flexible conduit making machine with more than 30 Years’ experience

Q: What can you supply for flexible conduit making machine?
A: Interlock hose making machine
    Squarelock hose making machine
Q:What sizes you machine can make?
A: Interlock Hose:ID3-ID450 on different machines

We need to know the following information to quote you correct machinery:

Q:What type of flexible conduit you need?
A:For instance, square lock or interlock hose, please send us profile drawing or picture to us.

Q:Hose size range
A:Such as:DN8-DN200

Q:Material of hose
A:Such as: Stainless steel (304,316L)/Galvanized steel

Q:Product type
A:Round/Polygonal interlock hose

Exhaust Pipe Interlock Flexible Metal Hose Making Machine   Stripwound Exhaust Pipe Maker